TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 574 of 1558
TM 9-2320-366-20-4 8-25. TRANSMISSION OIL COOLER HOSES REPLACEMENT (CONT) (31) Position four clamps (29) on transmission oil cooler hoses (3 and 26). NOTE Step (32) requires the aid of an assistant. (32) Position four clamps (29) on transmission oil cooler hose bracket (30) with four screws (31) and self-locking nuts (32). (33) Install gasket (33), flywheel cover (34), and transmission oil cooler hose bracket (30) on flywheel housing (35) with four washers (36) and screws (37). (34) Tighten four self-locking nuts (32) to 96-132 lb-in. (11-13 N·m). (35) Tighten four screws (37) to 16-25 lb-ft (21-35 N·m). NOTE Step (36) requires the aid of an assistant. (36) Position lower front support crossmember (38) on vehicle with four bolts (39) and self-locking nuts (40). (37) Tighten four self-locking nuts (40) to 295-369 lb-ft (400- 500 N·m). c. Follow-On Maintenance. (1) Lower dump body (TM 9-2320-366-10-1). (2) Service transmission (Appendix H). (3) Check transmission oil cooler hoses and fittings for oil leaks (TM 9-2320-366-10-2). End of Task. 8-134 Change 1