TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 566 of 1558
TM 9-2320-366-20-4 8-25. TRANSMISSION OIL COOLER HOSES REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Dump body raised (TM 9-2320-366-10-1). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Pan, Drain (Item 24, Appendix C) Wrench, Torque 0-200 lb-in. (Item 59, Appendix C) Tool Kit, Genl Mech (Item 46, Appendix C) Crowfoot Attachment, Socket Wrench (Item 12.1, Appendix B) Socket Set, Socket Wrench (Item 34, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Wrench, Torque, 0-600 lb-ft (Item 60, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Cap and Plug Set (Item 15, Appendix D) Tie, Cable, Plastic (Item 69, Appendix D) Nut, Self-locking (7) (Item 150, Appendix G) Packing, Preformed (2) (Item 178.1, Appendix G) Antiseize Compound (Item 58, Appendix D) Nut, Self-Locking (4) (Item 162, Appendix G) Gasket (Item 29.3, Appendix G) Packing, Preformed (4) (Item 179, Appendix G) Personnel Required (2) WARNING • Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. • Ensure exhaust system is cool before preforming maintenance. Failure to comply may result in injury to personnel. a. Removal. CAUTION Cap or plug hoses when disconnecting to prevent contamination of transmission oil. Failure to comply may result in damage to equipment. NOTE • Tag hoses and connection points prior to disconnecting. • Step (1) requires the aid of an assistant. (1) Remove four self-locking nuts (1), bolts (2), and lower front support crossmember (3) from vehicle. Discard self-locking nuts. 8-126 Change 1