TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download

Page 564 of 1558

TM 9-2320-366-20-4 8-24. M1088/M1089 TRANSMISSION OIL COOLER HOSES INITIAL INSTALLATION (CONT) (38) Position clamp (42) on transmission oil cooler hose (22). (39) Position clamp (42) on bracket (43) with screw (44) and self-locking nut (45). (40) Tighten self-locking nut (45) to 96-132 lb-in. (11-13 N·m). (41) Position three clamps (46) on transmission oil cooler hose (20). (42) Position clamp (47) on transmission oil cooler hose (22). NOTE Step (43) requires the aid of an assistant. (43) Position three clamps (46) and clamp (47) on transmission oil cooler hose bracket (48) with four screws (49) and self-locking nuts (50). (44) Install gasket (9), flywheel cover (8), and transmission oil cooler hose bracket (48) on flywheel housing (10) with four washers (7) and screws (51). (45) Tighten four self-locking nuts (50) to 96-132 lb-in. (11-15 N·m). (46) Tighten four screws (51) to 16-25 lb-ft (21-35 N·m). 8-124 Change 1