TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 534 of 1558
TM 9-2320-366-20-4 8-18. TRANSMISSION SCAVENGE PUMP HOSE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Exhaust pipe removed (para 5-3). Transmission oil cooler tube removed, if equipped (para 8-17). Transmission oil cooler hose removed, if equipped (para 8-25). Tools and Special Tools (Cont) Goggles, Industrial (Item 15, Appendix C) Pan, Drain (Item 24, Appendix C) Tool Kit, Genl Mech (Item 46, Appendix C) Materials/Parts Filter Element, Fluid (Item 18, Appendix G) Packing, Preformed (2) (Item 198, Appendix G) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. (1) Position drain pan under back end of scavenge pump hose (1). (2) Disconnect scavenge pump hose (1) from 45-degree fitting (2). (3) Remove scavenge pump hose (1) from fitting (3). 8-94 Change 1