TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 528 of 1558
TM 9-2320-366-20-4 8-17. TRANSMISSION OIL COOLER TUBES REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Goggles, Industrial (Item 15, Appendix C) Tools and Special Tools (Cont) Pan, Drain (Item 24, Appendix C) Materials/Parts Nut, Self-Locking (Item 150, Appendix G) WARNING • Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. • Ensure exhaust system is cool before performing maintenance. Failure to comply may result in injury to personnel. NOTE If transmission oil cooler tube is damaged, refer to paragraphs 8-23 or 8-24. a. Removal. (1) Place drain pan under oil cooler tube (1). (2) Disconnect oil cooler tube (1) from 90-degree fitting (2). 8-90 Change 1