TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 523 of 1558
TM 9-2320-366-20-4 (13) Position heat shield (15) on transmission auxiliary oil cooler (16) with two washers (17), screws (18), washers (19), spring washers (20), and self-locking nuts (21). (14) Position two screws (22), washers (23), and self-locking nuts (24) in heat shield (15). (15) Tighten two self-locking nuts (21) to 22-26 lb-ft (29-35 N·m). (16) Tighten two self-locking nuts (24) to 22-26 lb-ft (29-35 N·m). (c). Removal (S/N 7162 and higher). (1) Remove two self-locking nuts (1), washers (2), and screws (3) from heat shield (4). Discard self-locking nuts. (2) Remove two self-locking nuts (5), spring washers (6), washers (7), screws (8), washers (9), and heat shield (4) from transmission auxiliary oil cooler (10). Discard self- locking nuts and spring washers. Change 1 8-88.1