TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 516 of 1558
TM 9-2320-366-20-4 8-15. M1083/M1084/M1085/M1086/M1093 TRANSMISSION AUXILIARY OIL COOLER HOSE REPLACEMENT (CONT) c. Removal (S/N 7126 and higher). CAUTION Cap or plug hoses and fittings when disconnecting to prevent contamination of transmission oil. Failure to comply may result in damage to equipment. NOTE • Tag hoses, fittings, and connection points prior to disconnecting. • Remove plastic cable ties as required. (1) Position drain pan under transmission auxiliary cooler (1). (2) Disconnect transmission auxiliary oil cooler hose (2) from 90-degree fittings (3). (3) Remove preformed packing (4) from 90-degree fitting (3). Discard preformed packing. NOTE Step (4) requires the aid of an assistant. (4) Remove self-locking nut (5), bolt (6), and two clamps (7) from bracket (8). Discard self-locking nut. NOTE One clamp will be removed from trans- mission oil cooler hose that is being removed. (5) Remove clamp (7) from transmission auxiliary oil cooler hoses (2). 8-82.2 Change 1