TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download

Page 512 of 1558

TM 9-2320-366-20-4 8-15. M1083/M1084/M1085/M1086/M1093 TRANSMISSION AUXILIARY OIL COOLER HOSE REPLACEMENT This task covers: a. Removal (S/N 0001-7161) b. Installation (S/N 0001-7161) c. Removal (S/N 7162 and higher) d. Installation (S/N 7162 and higher) e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-57). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Pan, Drain (Item 24, Appendix C) Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Wrench, Torque 0-200 lb-ft (Item 60, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Crowfoot Attachment, Socket Wrench (Item 12.1, Appendix B) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Cap and Plug Set (Item 14, Appendix D) Ties, Cable, Plastic (Item 69, Appendix D) Nut, Self-Locking (Item 128, Appendix G) Packing, Preformed (2) (Item 179, Appendix G) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. Ensure exhaust system is cool before performing maintenance. Failure to comply may result in injury to personnel. NOTE Vehicle serial numbers 0001 through 7161 may have transmission oil cooler tubes installed. Vehicle serial numbers 7162 and higher will have transmission oil cooler hoses. a. Removal (S/N 0001-7161). CAUTION Cap or plug hoses and fittings when disconnecting to prevent contamination of transmission oil. Failure to comply may result in damage to equipment. NOTE • Tag hoses, fittings, and connection points prior to disconnecting. • Remove plastic cable ties as required. 8-80 Change 1