TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 501 of 1558
TM 9-2320-366-20-4 NOTE Perform step (32) on vehicles equipped with transmission oil cooler tubes. (32) Install preformed packing (54) on 90-degree fitting (55). NOTE Perform step (32.1) on vehicles equipped with transmission oil cooler hoses. (32.1) Install preformed packings (54 and 54.1) on 90-degree fitting (55). (33) Position 90-degree fitting (55) on transmission auxiliary oil cooler (29). (34) Tighten jam nut (56) on 90-degree fitting (55). (35) Position transmission auxiliary oil cooler hose (48) on 90- degree fitting (55). (35.1) Tighten transmission auxiliary oil cooler hose (48) to 94- 104 lb-ft (127-141 N·m). (36) Position heat shield (57) on transmission auxiliary oil cooler (29) with two washers (58), screws (59), washers (60), spring washers (61), and self-locking nuts (62). (37) Position two screws (63), washers (64), and self-locking nuts (65) in heat shield (57). (38) Tighten two self-locking nuts (62) to 22-26 lb-ft (29-35 N·m). (39) Tighten two self-locking nuts (65) to 22-26 lb-ft (29-35 N·m). Change 1 8-72.1/(8-72.2 Blank)