TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 475 of 1558
TM 9-2320-366-20-4 CAUTION Install bevel washers with tapered end toward transmission auxiliary oil cooler. Failure to comply may result in damage to equipment. (6) Position two brackets (9) and six bevel washers (10) on transmission auxiliary oil cooler (3) with four washers (11), screws (12), washers (13), lockwashers (14), and nuts (15). (7) Tighten four nuts (15) to 20-30 lb-ft (27-41 N·m). NOTE Steps (8) through (15) requires the aid of an assistant. (8) Position transmission auxiliary oil cooler (3) on vehicle. NOTE Right front and rear brackets are installed the same way. Right front bracket shown. (9) Position two spacers (16), spacers (17), and bracket (18) on bracket (9) with screw (19) and self-locking nut (20). (10) Position screw (21) and self-locking nut (22) in bracket (18). (11) Tighten self-locking nuts (20 and 22) to 20-30 lb-ft (27-41 N·m). (12) Perform steps (8) through (11) on right rear bracket. Change 1 8-48.1/(8-48.2 Blank)