TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 469 of 1558
TM 9-2320-366-20-4 8-11. M1083/M1084/M1085/M1086/M1093 TRANSMISSION AUXILIARY OIL COOLER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-57). Winch control valve assembly removed, if equipped (para 17-25). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Pan, Drain (Item 24, Appendix C) Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Crowfoot Attachment, Socket Wrench (Item 12.1, Appendix B) Socket Set, Socket Wrench (Item 34, Appendix C) Material/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Cap and Plug Set (Item 14, Appendix D) Nut, Self-Locking (5) (Item 150, Appendix G) Nut, Self-Locking (8) (Item 154, Appendix G) Nut, Self-Locking (4) (Item 158, Appendix G) Lockwasher (6) (Item 95, Appendix G) Packing, Preformed (2) (Item 178.1, Appendix G) Packing, Preformed (4) (Item 179, Appendix G) Transmission Auxiliary Oil Cooler Rubber Seal (2) (Item E-10, Appendix E) Personnel Required (2) WARNING • Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. • Ensure exhaust system is cool before performing maintenance. Failure to comply may result in injury to personnel. Change 1 8-45