TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 467 of 1558
TM 9-2320-366-20-4 NOTE Perform steps (6) through (9) on vehicles equipped with transmission oil cooler tubes. (6) Install two preformed packings (6) on fittings (7). (7) Install two fittings (7) on transmission oil cooler (1). (8) Position transmission oil cooler tubes (8 and 9) on two fittings (7). (9) Tighten transmission oil cooler tubes (8 and 9) to 94-104 lb-ft (127-141 N·m). (10) Loosen three screws (10) in clamps (11) as far as possible without disengaging screws from D-nuts (12). (11) Unhook clamp tab (13) from tab window (14) on three clamps (11). (12) Position three clamps (11) on coolant hoses (15, 16, and 17). Change 1 8-43