TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download

Page 463 of 1558

TM 9-2320-366-20-4 8-10. TRANSMISSION OIL COOLER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Container (60 qt (57 L) capacity) Pan, Drain (Item 24, Appendix C) Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-75 lb-in. (Item 90, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix B) Crowfoot Attachment, Socket Wrench (Item 12.1,Appendix B) Materials/Parts Antifreeze, Ethylene Glycol, Permanent (Item 12, Appendix D) Packing, Preformed (4) (Item 179, Appendix G) Packing, Preformed (2) (Item 178.1, Appendix G) Nut, Self-Locking (Item 130.1, Appendix G) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. Ensure exhaust system is cool before performing maintenance. Failure to comply may result in injury to personnel. a. Removal. (1) Position container under radiator (1). (2) Remove radiator cap (2) from radiator overflow tank (3). (3) Open radiator draincock (4) and drain coolant. (4) Close radiator draincock (4). Change 1 8-39