TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 46 of 1558
TM 9-2320-366-20-4 7-80. ENGINE CONTROL CABLE ASSEMBLY REPLACEMENT (CONT) (35) Remove two self-locking nuts (67), screws (68), and clamps (69) from brackets (70 and 71). Discard self-locking nuts. (36) Remove two clamps (69) from engine control cable assembly (53). (37) Remove self-locking nut (72), screw (73), and clamp (74) from left frame rail (75). (38) Remove clamp (74) from engine control cable assembly (53). (39) Remove engine control cable assembly (53) from vehicle. b. Installation. NOTE Install plastic cable ties as required. (1) Position engine control cable assembly (1) in vehicle. (2) Install clamp (2) on engine control cable assembly (1). (3) Install clamp (2) on left frame rail (3) with screw (4) and self-locking nut (5). 7-370