TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download

Page 457 of 1558

TM 9-2320-366-20-4 Change 2 8-33 8-9. TRANSMISSION OIL FILTER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Container (60 qt (57 L) capacity) Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Materials/Parts Oil, Lubricating, OE/HDO 15W40 (Item 44, Appendix D) Kit, Filter (Item 63, Appendix G) Screw, Cap (4) (Item 260.1, Appendix G) a. Removal. (1) Position container under transmission control valve module (1). (2) Remove drain plug (2) from transmission control valve module (1) and drain oil. WARNING CAUTION Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. Ensure exhaust system is cool before performing maintenance. Failure to comply may result in injury to personnel. There are two transmission oil filters. Do not replace one transmission oil filter without replacing the other. Failure to comply may result in damage to equipment.