TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 455 of 1558
TM 9-2320-366-20-4 (21) Connect connector P119 (28) to connector J119 (23). (22) Remove nut (29), lockwasher (30), terminal lug TL57 (31), washer (32), screw (33), and washer (34) from dashboard (10). Discard lockwasher. (23) Install WTEC III dashboard cable assembly (para 7-11). b. WTEC III TPSS Calibration. NOTE WTEC III TPSS requires calibration after installation. Calibration is accomplished in steps (1) through (4). (1) Position master power switch to on and wait for neutral (N) indication from WTEC III TPSS (TM 9-2320-366-10- 1). (2) Position master power switch to off (TM 9-2320-366-10- 1). 8-31