TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 452 of 1558
TM 9-2320-366-20-4 8-8. WTEC III TRANSMISSION CONTROLS INITIAL INSTALLATION (CONT) NOTE • Install plastic cable ties as required. • Route WTEC III cab transmission harness with connector J119 going through forward hole in dashboard under kick panel, until in position under left side dashboard. (7) Position WTEC III cab transmission harness (11) in dashboard (10). NOTE Perform steps (8) through (10) on vehicles equipped with auxiliary panel. (8) Route auxiliary panel cable assembly (9) through forward hole in dashboard (10). (9) Connect connector P108 (6) to connector J108 (5). (10) Connect connector P210 (8) to connector J210 (7). 8-28