Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download

Page 45 of 1558

TM 9-2320-366-20-4 Change 2 7-369 (25) Lift dust boot (48) on terminal lug TL35 (49). (26) Remove self-locking nut (50), washer (51), and terminal lug TL35 (49) from voltage regulator (52). Discard self-locking nut. (27) Remove dust boot (48) from engine control cable assembly (53). (28) Lift dust boot (54) on terminal lug TL110 (55). (29) Remove self-locking nut (56), washer (57), and terminal lug TL110 (55) from voltage regulator (52). Discard self-locking nut. (30) Remove dust boot (54) from engine control cable assembly (53). (31) Disconnect connector clamp (58) from connector P41 (59). (32) Disconnect connector P41 (59) from coolant temp- erature gage sensor connector (60). (33) Remove two self-locking nuts (61), screws (62), and clamps (63 and 64) from clamps (65 and 66). Discard self-locking nuts. (34) Remove clamps (63 and 64) from engine control cable assembly (53). NOTE Perform steps (28) through (30) on vehicles equipped with alternator P/N N1506-1 (12420852).