TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 417 of 1558
TM 9-2320-366-20-4 Change 2 7-747/(7-748 Blank) (5) Install DUMP BED UP/DOWN switch (7) in dump switch bracket (8). (6) Connect connector P911A (9) to DUMP BED UP/DOWN switch (7) (7) Connect connector P911 (10) to DUMP BED UP/DOWN switch (7). (8) Perform steps (5) through (7) on remaining rocker switch. (9) Position dump switch bracket (8) on instrument panel (11) with two washers (12) and screws (13). (10) Tighten two screws (13) to 24-30 lb-in. (2-3 N•m). c. Follow-On Maintenance. (1) Connect batteries (para 7-57). (2) Check rocker switches and tachometer operation (TM 9-2320-366-10-1). End of Task. NOTE All rocker switches are installed the same way. DUMP BED UP/DOWN switch shown.