TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 41 of 1558
TM 9-2320-366-20-4 Change 2 7-365 7-80. ENGINE CONTROL CABLE ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-57). Instrument panel assembly removed for access (para 7- 15). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Ties, Cable, Plastic (Item 69, Appendix D) Lockwasher (2) (Item 93, Appendix G) Lockwasher (Item 103, Appendix G) Nut, Self-Locking (2) (Item 143, Appendix G) Nut, Self-Locking (Item 144, Appendix G) Nut, Self-Locking (5) (Item 128, Appendix G) Tape, Insulation, Electrical (Item 68, Appendix D) a. Removal. NOTE (1) Disconnect connector P31 (1) from connector J31 (2). (2) Disconnect connector P31X (3) from connector J31X (4). • Remove plastic cable ties as required. • Note routing of engine control cable assembly prior to removal. • Tag connectors and connection points prior to disconnecting.