TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 390 of 1558
TM 9-2320-366-20-4 7-145. M1089 REAR LIGHTS CABLE ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-57). Muffler and heat shield removed (para (5-2). Kick panel removed (para 16-3). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Goggles, Industrial (Item 15, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Ties, Cable, Plastic (Item 69, Appendix D) Lockwasher (8) (Item 76, Appendix G) Lockwasher (4) (Item 82, Appendix G) Lockwasher (4) (Item 96, Appendix G) Nut, Self-Locking (13) (Item 128, Appendix G) Washer, Spring (2) (Item 289, Appendix G) Personnel Required (2) a. Removal. WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. NOTE • Remove plastic cable ties as required. • Tag connectors, terminal lugs, and connection points prior to disconnecting. (1) Disconnect connector P74 (1), P76 (2), P77 (3), and P78 (4) from left taillight connectors 22 (5), 24 (6), 23 (7), and 21 (8). 7-720 Change 1