TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 387 of 1558
TM 9-2320-366-20-4 (13) Install lockout relay (13) on bracket (14) with screw (15), washer (16), lockwasher (17) and nut (18). (14) Install bracket (14) on junction box (2) with two rivets (19). (15) Connect new lockout relay connector (20) to lockout relay (13). NOTE Relay socket wires must be cut to length according to nearest routing in junction box. (16) Route green wire (21) to ground strip (22). (17) Cut green wire (21) to length. (18) Install quick disconnect terminal (23) on green wire (21). (19) Connect green wire (21) on ground strip (22) position 13. Change 1 7-717