Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download

Page 380 of 1558

TM 9-2320-366-20-4 7-143. M1084/M1086 JUNCTION BOX MODIFICATION (CONT) (11) Install six rivets (16) in junction box (2). NOTE Measurements and drilling will be on the outside rear of junction box. (12) Measure and mark junction box (2) 3.30 in. (83.8 mm) over from curb side edge. (13) Measure and mark junction box (2) 4.55 in. (115 mm) over from curb side edge. (14) Measure and mark junction box (2) 1.57 in. (40 mm) up from bottom. (15) Drill two 0.172 in. (4.37 mm) holes at marked locations on junction box (2). (16) Install new lockout relay (18) and new shutdown relay (19) on bracket (20) with screw (21), washer (22), lockwasher (23) and nut (24). (17) Install bracket (20) on junction box (2) with two rivets (25). (18) Connect lockout relay connector (26) to lockout relay (18). (19) Connect shutdown relay connector (27) to shutdown relay (19). 7-710 Change 1