TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download

Page 375 of 1558

TM 9-2320-366-20-4 (8) Loosen screw (19) on top of terminal blocks TB4A (20), TB6A (21), TB12 (22), TB14 (23), TB18 (24), and TB19 (25). (9) Remove ten wires (26) from top of terminal block TB4A (20), TB6A (21), TB12 (22), TB14 (23), TB18 (24), and TB19 (25). (10) Loosen screw (27) on top of five terminal blocks TBC (28). (11) Remove six wires (29) from top of five terminal blocks TBC (28). NOTE • Note routing of wiring harness prior to removal. • Remove plastic cable ties as required. (12) Remove 30K winch control wiring harness (30) from vehicle. b. Installation. (1) Route 30K winch control wiring harness (1) on vehicle. (2) Position six wires (2) on top of five terminal blocks TBC (3). (3) Tighten screw (4) on top of five terminal blocks TBC (3). Change 1 7-705