TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 372 of 1558
TM 9-2320-366-20-4 7-141. LOW PRESSURE TRANSMITTER REPLACEMENT (CONT) WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (13) Apply antiseize compound to threads of air pressure transmitter (8). (14) Install air pressure transmitter (8) in reducer bushing (9). (15) Install terminal lugs TL201 (6) and TL202 (7) on air pressure transmitter (8) with two lockwashers (10) and nuts (11). (16) Apply antiseize to nuts (11), lockwashers (10), and terminal lugs TL201 (6) and TL202 (7). (17) Install boot (1) on air pressure transmitter (8). (18) Apply adhesive to holes TLR and TTR and around edges of boot (1). c. Follow-On Maintenance. Lower cab (TM 9-2320-366-10-1). End of Task. 7-702 Change 1