TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 370 of 1558
TM 9-2320-366-20-4 7-141. LOW PRESSURE TRANSMITTER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Cab raised (TM 9-2320-366-10-1). Air tanks drained (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Drill, Portable, Electric (Item 7, Appendix C) Drill Set, Twist (Item 6, Appendix C) Materials/Parts Adhesive (Item 10.1, Appendix D) Antiseize Compound (Item 13, Appendix D) Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Lockwasher (2) (Item 93, Appendix G) a. Removal. NOTE • Perform step (1) on vehicle serial number 7448 and higher and vehicle serial numbers 0001 through 7447 that have previously had front lights cable assembly replaced. • Tag wires and connection points prior to removal. (1) Remove adhesive and boot (1) from low pressure transmitter (2). (2) Remove adhesive, two nuts (3), lockwashers (4), and terminal lugs TL201 (5) and TL202 (6) from low pressure transmitter (2). Discard lockwashers. (3) Remove low pressure transmitter (2) from reducer bushing (7). 7-700 Change 1