TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 368 of 1558
TM 9-2320-366-20-4 7-140. M1088 INTERMEDIATE INTERVEHICULAR 24 VDC (12 Pin) CABLE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-57). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Goggles, Industrial (Item 15, Appendix C) Materials/Parts Ties, Cable, Plastic (Item 69, Appendix D) Lockwasher (4) (Item 112, Appendix G) NOTE Vehicle serial numbers 0001 through 2359 were not originally equipped with gladhand selector valves. Vehicle serial numbers 2360 and higher are equipped with gladhand selector valves. M1088 without gladhand selector valves shown. a. Removal. NOTE Remove plastic cable ties as required. (1) Disconnect connector J53 (1) from connector P53M (2). (2) Remove four nuts (3), lockwashers (4), screws (5), cover (6), and intermediate intervehicular 24 vdc cable (7) from mounting bracket (8). Discard lockwashers. 7-698 Change 1