TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 366 of 1558
TM 9-2320-366-20-4 7-139. M1088 INTERMEDIATE INTERVEHICULAR 12 VDC (7 Pin) CABLE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-57). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Goggles, Industrial (Item 15, Appendix C) Materials/Parts Ties, Cable, Plastic (Item 69, Appendix D) Nut, Self-Locking (2) (Item 128, Appendix G) NOTE Vehicle serial numbers 0001 through 2359 were not originally equipped with gladhand selector valves. Vehicle serial numbers 2360 and higher are equipped with gladhand selector valves. M1088 without gladhand selector valves shown. a. Removal. NOTE Remove plastic cable ties as required. (1) Disconnect connector J52 (1) from connector P52M (2). (2) Remove two self-locking nuts (3), screws (4), washers (5), and intermediate intervehicular 12 vdc cable (6) from mounting bracket (7). Discard self-locking nuts. 7-696 Change 1