TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 358 of 1558
TM 9-2320-366-20-4 7-137. CAB TRANSMISSION HARNESS REPLACEMENT (CONT) b. Installation. CAUTION Cab transmission harness connectors are easily damaged. Use care when routing harness through dashboard. Failure to comply may result in damage to equipment. NOTE If replacing WTEC II cab transmission harness with WTEC III cab transmission harness perform para 7-138. (1) Route WTEC II cab transmission harness (1) through left side of dashboard (2). WARNING Ensure WTEC II cab transmission harness does not interfere with throttle linkage. Failure to comply may result in injury to personnel. NOTE Step (2) requires the aid of an assistant. (2) Install gasket (3) and connector J119 (4) on cab (5) with four screws (6), lockwashers (7), and nuts (8). 7-688