TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 340 of 1558
TM 9-2320-366-20-4 7-136. TRANSMISSION AUXILIARY OIL COOLER FAN CABLE ASSEMBLY REPLACEMENT This task covers: a. Removal (M1083 with winch/M1084/M1085 with winch/M1086/M1090/M1094) b. Installation (M1083 with winch/M1084/M1085 with winch/M1086/M1090/M1094) c. Removal (M1083 w/o winch/M1085 w/o winch/M1092/M1093 w/o winch/M1096) d. Installation (M1083 w/o winch/M1085 w/o winch/M1092/M1093 w/o winch/M1096) e. Removal (M1088 w/o winch) f. Installation (M1088 w/o winch) g. Follow-On Maintenance INITIAL SETUP Equipment Conditions Dump body raised to maintenance position (M1090/M1094) (TM 9-2320-366-10-1). Batteries disconnected (para 7-57). Lower radiator fan shroud removed (c. thru f.) (para 6-4). Personnel heater removed for access (c. thru f.) para 18-9). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Goggles, Industrial (Item 15, Appendix C) Tools and Special Tools (Cont) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Materials/Parts Ties, Cable, Plastic (Item 69, Appendix D) Nut, Self-Locking (4) (Item 128, Appendix G) Nut, Self-Locking (2) (Item 150, Appendix G) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal (M1083 with winch/M1084/M1085 with winch/M1086/M1090/M1094). NOTE Remove plastic cable ties as required. (1) Disconnect connector clamp (1) from connector P209 (2). (2) Disconnect connector P209 (2) from connector J209 (3). 7-670