TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 338 of 1558
TM 9-2320-366-20-4 7-135. WINCH CONTROL VALVE CABLE ASSEMBLY REPLACEMENT (CONT) NOTE • Other hoses, cable assemblies, and terminal lugs are installed with clamps and winch control valve cable assembly. • Steps (7) and (8) require the aid of an assistant. (7) Position three clamps (11) on winch control valve cable assembly (1). (8) Install winch control valve cable assembly (1) on right frame rail (6) with three clamps (11), screws (12), and self-locking nuts (13). (9) Position clamp (14) on winch control valve cable assembly (1). (10) Install terminal lug TL320 (15) on screw (16). (11) DELETED (12) Install terminal lug TL111 (17) on screw (16). (13) Position terminal lug TL83 (18) and clamp (14) on screw (16) with self-locking nut (19). (14) Tighten self-locking nut (19) to 97-120 lb-in. (11-14 N·m). 7-668 Change 1