TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 336 of 1558
TM 9-2320-366-20-4 7-135. WINCH CONTROL VALVE CABLE ASSEMBLY REPLACEMENT (CONT) (2) Remove self-locking nut (3), clamp (4), terminal lug TL83 (5) from screw (6). Discard self-locking nut. (3) Remove terminal lug TL111 (7) and terminal lug TL320 (8) from screw (6). (4) DELETED (5) Remove clamp (4) from winch control valve cable assembly (9). NOTE • Other hoses, cable assemblies, and terminal lugs are removed with clamps and winch control valve cable assembly. • Steps (6) and (7) require the aid of an assistant. (6) Remove three self-locking nuts (10), clamps (11), winch control valve cable assembly (9), and three screws (12) from right frame rail (13). Discard self-locking nuts. (7) Remove three clamps (11) from winch control valve cable assembly (9). 7-666 Change 1