TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 329 of 1558
TM 9-2320-366-20-4 b. Installation. (1) Install lockwasher (1) and starter to chassis ground cable (2) on chassis (3) with screw (4) and self-locking nut (5). (2) Position starter to chassis ground cable (2) and terminal lugs TL46 (6) and TL25 (7) on starting motor terminal (8) with nut (9). (3) Tighten nut (9) to 15-20 lb-ft (20-27 N·m). WARNING Adhesive, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (4) Apply adhesive to starting motor terminal (8). Change 1 7-659