TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 311 of 1558
TM 9-2320-366-20-4 7-132. START AND CHARGING CABLE ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Spare tire lowered (TM 9-2320-366-10-2). Batteries disconnected (para 7-57). Instrument panel assembly removed for access (para 7-15). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Heater, Gun Type, Electric (Item 24, Appendix B) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Ties, Cable, Plastic (Item 69, Appendix D) Materials/Parts (Cont) Adhesive (Item 8, Appendix D) Nut, Self-Locking (7) (Item 128, Appendix G) Nut, Self-Locking (Item 150, Appendix G) Nut, Self-Locking (Item 153, Appendix G) Lockwasher (Item 96, Appendix G) Lockwasher (3) (Item 87, Appendix G) Lockwasher (2) (Item 89, Appendix G) Splice, Conductor (Item 274.7, Appendix G) Tape, Insulation, Electrical (Item 68, Appendix D) Insulation Sleeving, Electrical (Item 28.1, Appendix D) Personnel Required (2) a. Removal. NOTE • Remove plastic cable ties as required. • Tag connectors and connection points prior to disconnecting. (1) Disconnect connector P43 (1) from connector J43 (2). (2) Position connector P43 (1) through bottom of dashboard (3). (3) Disconnect connector P43X (4) from connector J43X (5). (4) Position connector P43X (4) through side of dashboard (3). Change 1 7-643