TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 308 of 1558
TM 9-2320-366-20-4 7-131. 100 AMP REVERSE POLARITY RELAY TO POWER DISTRIBUTION (PDP) PANEL 24 VDC CABLE REPLACEMENT (CONT) b. Installation. NOTE Install plastic cable ties as required. (1) Position 100 amp reverse polarity relay to PDP 24 vdc cable (1) through bottom of cab (2). (2) Position 100 amp reverse polarity relay to PDP 24 vdc cable (1) in clamp (3). (3) Position clamps (3 and 4) on frame rail (5) with washer (6), screw (7), washer (8), and self-locking nut (9). (4) Tighten self-locking nut (9) to 97-120 lb-in. (11-14 N·m). (5) Position 100 amp reverse polarity relay to PDP 24 vdc cable (1) in clamp (10). (6) Install clamp (10) on frame rail (5) with screw (11) and self-locking nut (12). (7) Tighten self-locking nut (12) to 97-120 lb-in. (11-14 N·m). 7-640