Sign up to sell your inventory with NSN Lookup

TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download

Page 292 of 1558

TM 9-2320-366-20-4 7-127. POWER TAKE-OFF (PTO) CABLE ASSEMBLY REPLACEMENT (CONT) (19) Disconnect connector P210 (36) from connector J210 (37). (20) Remove PTO cable assembly (12) from cab (38). b. Installation. NOTE Install plastic cable ties as required. (1) Position PTO cable assembly (1) in cab (2). (2) Connect connector J210 (3) to connector P210 (4). (3) Position PTO cable assembly (1) in clamp (5). (4) Position clamp (5) and clamp (6) on frame rail (7) with screw (8) and self-locking nut (9). (5) Tighten self-locking nut (9) to 84-108 lb-in. (10-12 N·m). 7-624