TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 289 of 1558
TM 9-2320-366-20-4 7-127. POWER TAKE-OFF (PTO) CABLE ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-57). Kick panel removed (para 16-3). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Socket Set, Socket Wrench (Item 36, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Ties, Cable, Plastic (Item 69, Appendix D) Nut, Self-Locking (5) (Item 153, Appendix G) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. NOTE • Tag connectors and connection points prior to disconnecting. • Remove plastic cable ties as required. (1) Disconnect connector P217 (1) from PTO solenoid connector (2). (2) Disconnect connector P216 (3) from PTO pressure switch connector (4). 7-621