TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 280 of 1558
TM 9-2320-366-20-4 7-125. M1090/M1094 DUMP POWER CABLE ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Dump body raised to maintenance position (TM 9- 2320-366-10-1). Batteries disconnected (para 7-57). Kick panel removed (para 16-3). Lower radiator fan shroud removed (para 6-4). Gravel deflector and gravel deflector extension removed (para 14-13). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Goggles, Industrial (Item 15, Appendix C) Tools and Special Tools (Cont) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Materials/Parts Ties, Cable, Plastic (Item 69, Appendix D) Nut, Self-Locking (5) (Item 128, Appendix G) Deleted Personnel Required (2) a. Removal. NOTE Remove plastic cable ties as required. (1) Disconnect connector J108 (1) from connector P108 (2). (2) Remove grommet (3) from cab (4). (3) Remove dump power cable assembly (5) from grommet (3). (4) Raise cab (TM 9-2320-366-10-1). NOTE • Steps (5) through (18) require the aid of an assistant. • Note routing of cable assembly prior to removal. (5) Remove dump power cable assembly (5) from cab (4). 7-612 Change 1