TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 276 of 1558
TM 9-2320-366-20-4 7-124. M1090/M1094 DUMP CABLE ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Dump body raised to maintenance position (TM 9- 2320-366-10-1). Batteries disconnected (para 7-57). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Materials/Parts Dispenser, Pressure Adhesive Sensitive Tape (Item 20, Appendix D) Lockwasher (8) (Item 110, Appendix G) Nut, Self-Locking (6) (Item 165, Appendix G) a. Removal. (1) Disconnect connector P172 (1) from connector J172 (2). (2) Remove four nuts (3), lockwashers (4), screws (5), and connector J172 (2) from connector plate (6). Discard lockwashers. (3) Remove four nuts (7), lockwashers (8), screws (9), and connector plate (6) from crossmember (10). Discard lockwashers. (4) Disconnect connector P25 (11) from dump body switch connector (12). (5) Remove self-locking nut (13), screw (14), washer (15), and clamp (16) from crossmember (10). Discard self- locking nut. (6) Remove clamp (16) from dump cable assembly (17). 7-608