TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 251 of 1558
TM 9-2320-366-20-4 (5) Remove connector cover (12) from remote control cable connector (13). (6) Remove nut (14), screw (15), connector cover (12), and lanyards (16 and 17) from support structure (18). NOTE Note routing of cable assembly prior to removal. (7) Remove four nuts (19), screws (20), and remote control cable assembly (21) from vehicle. b. Installation. (1) Install remote control cable assembly (1) on vehicle with four screws (2) and nuts (3). (2) Install lanyards (4 and 5) on support structure (6) with screw (7) and nut (8). (3) Install connector cover (9) on remote control cable connector (10). NOTE Install plastic cable ties as required. (4) Position 17 electrical wires (11) on terminal board (12) at positions 2, 3, 4, 6, 7a, 8, 9, and 10 through 19. (5) Tighten 17 screws (13) on terminal board (12) at positions 2, 3, 4, 6, 7a, 8, 9, and 10 through 19. 7-583