TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download

Page 230 of 1558

TM 9-2320-366-20-4 7-112. M1089 HOIST UP LOCKOUT SOLENOID CABLE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Batteries disconnected (para 7-57). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Tool Kit, Electrical (Item 45, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Ties, Cable, Plastic (Item 69, Appendix D) Varnish, Oil (Item 70, Appendix D) a. Removal. NOTE Remove plastic cable ties as required. (1) Disconnect connector (1) from hoist up lockout solenoid (2). (2) Loosen four screws (3) on junction box (4). (3) Open cover (5) on junction box (4). 7-562