TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download

Page 223 of 1558

TM 9-2320-366-20-4 (11) Loosen two screws (29) on clamp (30). (12) Remove compression nut (31) from connector (32). (13) Remove crane power cable (33) from compression nut (31). b. Installation. (1) Install crane power cable (1) through compression nut (2) and connector (3). (2) Install compression nut (2) on connector (3). (3) Tighten two screws (4) on clamp (5). (4) Install quick disconnect terminal (6) on green wire (7). (5) Install terminal lug (8) on black wire (9). (6) Install terminal lug (10) on white wire (11). (7) Install terminal lug (12) on white wire (13). 7-555