TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 221 of 1558
TM 9-2320-366-20-4 7-110. M1089 CRANE POWER CABLE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions MHC erected (TM 9-2320-366-10-2). Engine shut down (TM 9-2320-366-10-1). Batteries disconnected (para 7-57). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Tool Kit, Electrical (Item 45, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Ties, Cable, Plastic (Item 69, Appendix D) Varnish, Oil (Item 70, Appendix D) Lockwasher (8) (Item 102, Appendix G) Nut, Self-Locking (2) (Item 135, Appendix G) a. Removal. NOTE Remove plastic cable ties as required. (1) Remove eight screws (1), lockwashers (2), and washers (3) from control panel cover (4). Discard lockwashers. (2) Remove two self-locking nuts (5), four washers (6), two screws (7), and control panel top cover (4) from control panel (8). Discard self-locking nuts. NOTE Tag wires and connection points prior to disconnecting. (3) Loosen screws (9 and 10) on terminal board (11) positions 7A and C. (4) Remove black wire (12), green wire (13), and shield (14) from terminal block (11). 7-553