TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 219 of 1558
TM 9-2320-366-20-4 (5) Disconnect connector P107 (13) from connector J107 (14). (6) Loosen back shell (15) on connector J107 (14). (7) Remove four nuts (16), screws (17), washers (18), control panel power cable assembly (19), and back shell (15) from control panel (8). b. Installation. (1) Install control panel power cable assembly (1) and back shell (2) in control panel (3) with four washers (4), screws (5), and nuts (6). (2) Install back shell (2) on connector J107 (7). (3) Connect connector P107 (8) to connector J107 (7). NOTE Install plastic cable ties as required. (4) Position five electrical wires (9) on terminal board assembly (10) at positions 9,9,10,19,C (11). (5) Tighten five screws (12) on terminal board assembly (10) at positions 9,9,10,19,C (11). 7-551