TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1338 of 1558
E-8. M1089 SOLENOID TEST ADAPTER Assemble the M1089 solenoid test adapter according to the following steps. Refer to the following parts list and Figure E-12. M1089 Solenoid Test Adapter for details. Part Number Material Description National Stock Number Qty 2-2-2 080401CA Tee, Tube 4730-01-214-6990 1 2-2 080202CA Elbow, Pipe to Tube 4730-00-845-5345 1 4-2 130140B Bushing, Pipe 4730-00-828-0171 1 NB-2-031 Tubing, Nonmetallic 4720-01-287-4499 24 in. Figure E-12. M1089 Solenoid Test Adapter a. All dimensions are in inches (millimeters). b. Cut one piece of nonmetallic tubing (1) to 6.0 in. (152.4 mm) long. c. Cut one piece of nonmetallic tubing (2) to 18.0 in. (457.2 mm) long. c. Remove three nuts (3) and ferrule sleeves (4) from tube tee (5). d. Install two nuts (3) and ferrule sleeves (4) on nonmetallic tubing (1). e. Install nonmetallic tubing (1) on tube tee (5). f. Remove nut (6) and ferrule sleeve (7) from pipe to tube elbow (8). g. Install two nuts (3 and 6) and ferrule sleeves (4 and 7) on nonmetallic tubing (2). h. Install nonmetallic tubing (2) on tube tee (5). i. Install nut (6) on pipe to tube elbow (8). j. Install pipe bushing (9) on pipe to tube elbow (8). E-16 E-16 TM 9-2320-366-20-4