TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1268 of 1558
TM 9-2320-366-20-4 16-26. LATCH AND CAB LATCH BRACKETS REPLACEMENT (CONT) CAUTION Cab latches must be adjusted so that it rides squarely on the support pins and does not contact the welded area of the support pins. Failure to comply may result in damage to equipment. (4) Adjust cab latch (1) on support pin (6). (5) Raise cab (TM 9-2320-366-10-1). CAUTION Do not allow cab anchor to change position while tightening screws. Failure to comply may result in damage to equipment. (6) Tighten two screws (4) to 34-44 lb-ft (44-60 N·m). (7) Lower cab (TM 9-2320-366-10-1). End of Task. 16-196 Change 1