TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1264 of 1558
TM 9-2320-366-20-4 16-194 Change 2 16-26. LATCH AND CAB LATCH BRACKETS REPLACEMENT (CONT) (6) Tighten three screws (7) to 34-44 lb-ft (44-60 N•m). (7) Raise cab (TM 9-2320-366-10-1). (8) Tighten two self-locking nuts (5) to 34-44 lb-ft (44-60 N•m). (9) Lower cab (TM 9-2320-366-10-1). (10) Apply sealing compound to inside of latch bracket (4). CAUTION WARNING Ensure cab latch brackets on each side of the cab support bridge rest squarely on the support pins. Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel.