TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1263 of 1558
TM 9-2320-366-20-4 b. Latch Bracket Installation. (1) Position latch bracket (1) on cab (2) with two washers (3), screws (4), and self-locking nuts (5). (2) Install three washers (6) and screws (7) in latch bracket (1). (3) Raise cab slightly and remove cab support tool from engine rear lifting eye (8) (TM 9-2320-366-10-1). (4) Lower cab (TM 9-2320-366-10-1). NOTE Outside screws are loosened first, then the center screw. (5) Loosen three screws (7) on latch bracket (1). Change 1 16-193