TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1258 of 1558
TM 9-2320-366-20-4 16-25. M1089 VISE MOUNT AND DECK PLATE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Vise removed (TM 9-2320-366-10-2). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Materials/Parts Nut, Self-Locking (26) (Item 136, Appendix G) Personnel Required (2) a. Removal. WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. NOTE Steps (1) through (6) require the aid of an assistant. (1) Remove four self-locking nuts (1), eight washers (2), and four screws (3) from ladder support hand rail brackets (4 and 5). Discard self-locking nuts. (2) Remove self-locking nut (6), two washers (7), screw (8), rear ladder (9), and front ladder support hand rail bracket (4) from vehicle. Discard self-locking nut. (3) Remove self-locking (10), two washers (11), screw (12), rear ladder support hand rail bracket (5), and deck plate (13) from vehicle. Discard self-locking nut. 16-188