TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1254 of 1558
TM 9-2320-366-20-4 16-24. M1089 LADDERS REPLACEMENT/REPAIR (CONT) c. Tool Box Ladder Assembly. NOTE Note position of skids prior to installation. (1) Position two skids (1) on ladder (2) with four washers (3), screws (4), and self-locking nuts (5). (2) Tighten four screws (4) to 17-19 lb-ft (23-26 N·m). (3) Position spring (6) and pin (7) on ladder (2). (4) Install roll pin (8) in pin (7). d. Tool Box Ladder Installation. (1) Position two handrails (1) on ladder support hand rail brackets (2 and 3) with eight washers (4), four screws (5), and self-locking nuts (6). (2) Tighten four self-locking nuts (6) to 76-84 lb-ft (103-114 N·m). (3) Install two bushings (7) on ladder support hand rail brackets (2 and 3). (4) Position rear ladder support hand rail bracket (2) on vehicle with two washers (8), screw (9), and self-locking nut (10). (5) Tighten self-locking nut (10) to 76-84 lb-ft (103-114 N·m). 16-184 Change 1